-
Get your 8th and 9th generation Civic or Acura CSX & ILX track ready with SPC's forged aluminum adjustable rear camber arm. SPC forged aircraft grade aluminum arm weighs less than the OE arm it will replace. The arm is built with SPC's xAxis sealed...$189.95 -
Use this adjustable control arm to dial in rear camber on the 2011 and up Scion tC. Simply replace the rear upper control arm with this adjustable arm. Arm includes SPC's xAxis sealed flex joint on the outboard and rubber bonded bushing on the inner...$151.99 -
-
B8 Control Arms are a direct fit upgrade for factory upper control arms on trucks and SUVs. The kit contains a pair of control arms which correct the caster alignment for better straight line stability with lifted suspensions, and the improved pivot...$713.00 -
KTA123 is a complete kit of 4 adjustable control arms fitted with low compliance bushings designed to modify rear factory camber - toe and track. The result is greater range and more precise adjustment and a more direct connection between body and rear...$628.88 -
ISC Suspension 08-21 Subaru Impreza V3 Rear Adjustable Control Arms - Stealth Series Black$475.00 -
These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint?that combines the durability of a ball joint with the performance characteristics of a traditional uniball.?While the industry standard...$879.95 -
Restore drivability on lowered 2004-2020 Ford F150 trucks with SPC's control arms. These arms give ?2.0? of camber and -1.0? to +3.0? of caster adjustability while also giving more ball joint articulation on trucks lowered up to 2.5". Featuring an...$749.95 -
ICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of...$1,439.95 -
ICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of...$879.95 -
Add rear camber adjustment to your Toyota Highlander or Lexus RX with this adjustable camber arm. With +-3deg of adjustment, this arm will get your vehicle back into factory specification to ensure proper tire wear, handling, and ride quality. California...$151.99 -
Fully adjust camber and toe on the rear suspension of your Subaru Outback, Legacy or Baja with this two arm kit from SPC. This kit offers a full +-2.5deg of camber and toe change so you can get back to factory alignment specifications. Whether you need...$177.99 -
ICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of...$1,439.95 -
ICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of...$879.95 -
SuperPro 2003 Lexus GX470 Base Front Lower Camber/Caster Adjustable Control Arm Kit$779.99 -
SuperPro 2010 Toyota FJ Cruiser Base Front Lower Camber/Caster Adjustable Control Arm Kit (w/o KDSS)$799.99 -
-
-
Installation: Easy 1-hour bolt-on installation requires no drilling, uses OEM hardware.$149.99 -
-
SuperPro 02-05 Subaru Impreza WRX / 04-06 WRX STI Front Lower Alloy Control Arm Kit$849.99 -
Remove and replace your factory rear upper control arm with SPC's adjustable arm to make rear camber changes on your latemodel Honda. SPC's unique adjustment design permits on car adjustment of ?3.0? camber and is adjustable for life. SPC's forged...$129.95 -
Make the non-adjustable lower control arms on your 996 or 997 Porsche adjustable for up to ?2? camber adjustment. This pair of 6061-T6 aluminum arms (2) from SPC will give easy on-the-car adjustability as well as get you track ready, while maintaining OE...$895.96 -
Launching harder, reducing wheel hop, and adding cornering consistency to your 2011-2014 Ford Mustang is easy with an upper control arm from BMR Suspension. The stock control arm with soft rubber bushings deflect under load and absorb power instead of...$109.95 -
Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-2004 Ford Mustang is easy with adjustable upper control arms from BMR Suspension. The stock control arms with soft rubber bushings deflect under load and absorb power...$159.95 -
2019-20 Chevy Silverado 1500, GMC Sierra 1500 2WD/4WD - Fits 0-6" Lifts. 2019-20 Chevy Silverado 1500 Trail Boss GMC Sierra 1500 AT4 4WD - Fits 0-4" Lifts. Fabtech's Uniball Upper Control Arms provide increased strength to the front suspension by...$798.18 -
These front lower control arm kits enable the owners of Ford vehicles to upgrade them with low-friction ball joints and improved inner bushings. They feature a higher quality nylon bearing that dramatically improves impact harshness, resulting in a...$336.99 -
-
Zone Offroad 07-17 Chevy 1500 2/4WD Adventure Series Upper Control Arm Kit (Cast Steel OE Arm)$509.95 -
Zone Offroad 14-18 GMC 1500 Adventure Series Upper Control Arm Kit (Alum / Stamp OE Arm)$509.95 -
-
-
-
Arms eliminate upper ball joint w/ super strong 1in ID Stainless American Uniball. Additional caster is built into Arms for greater align ability to help with problematic leveling kit alignments. Allows for increased wheel travel when used with Dirt...$798.18 -
Arms eliminate upper ball joint w/ super strong 1in ID Stainless American Uniball. Additional caster is built into Arms for greater align ability to help with problematic leveling kit alignments. Allows for increased wheel travel when used with Dirt...$798.18 -
-
-
-
Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop...$190.18 -
B8 Control Arms are a direct fit upgrade for factory upper control arms on trucks and SUVs. The kit contains a pair of control arms which correct the caster alignment for better straight line stability with lifted suspensions, and the improved pivot...$713.00 -
JKS Manufacturing 18-21 Jeep Wrangler JL Control Arm Correction Brackets 2-4.5in Lift$207.95 -
JKS Manufacturing 20-21 Jeep Gladiator JT Adjustable J-Flex Upper Control Arms - Rear$318.95 -
Los brazos de control superiores Rancho? Performance mejoran el rendimiento y la durabilidad de su camioneta Chevrolet? Silverado/GMC? Sierra 1500 nivelada o elevada. Fabricados con tubos de alta resistencia, estos brazos de control mantienen la rotula...$424.99 -
SuperPro 2008 Subaru Impreza WRX STI Front Lower Alloy Control Arm Kit (+Caster)$899.99 -
-
-
-
-
-
Trailing arm mount braces are designed to reinforce the upper and lower front control arm mounts on your classic A-Body. The more power your ride makes the better chance of bending or breaking the rear control arm mounts. These tubular reinforcements tie...$159.99 -
Ride height alterations can result in skewed suspension geometry, Belltech accounts for these types of issues and creates ways to correct them. One such solution is our angle correction control arms designed to correct negative camber, return proper ball...$375.00 -
Adjust front camber and caster ?1.5? on the Audi B8 and C7 platforms with these forged aluminum control arms from SPC. OE syle booted ball joints and bonded rubber bushings maintain factory ride, handling, and noise, vibration, & harshness (NVH)...$389.94 -
Reduce spindle movement and dynamic rear alignment changes with a Delrin upper control arm bushing from BMR Suspension. The factory upper A-arm has a bearing at the front of the A-arm and a large rubber bushing at the rear, which allows for a large...$129.95 -
Launching harder, reducing wheel hop, and adding cornering consistency to your 2008-2017 Dodge Challenger is easy with upper trailing arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power...$179.95 -
Launching harder, reducing wheel hop, and adding cornering consistency to your 2008-2017 Dodge Challenger is easy with upper trailing arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power...$179.95 -
Launching harder, reducing wheel hop, and adding cornering consistency to your 1964-1967 GM A-Body is easy with adjustable upper control arms from BMR Suspension. The stock stamped steel control arms with soft rubber bushings deflect under load and...$169.95 -
Launching harder, reducing wheel hop, and adding cornering consistency to your 2011-2014 Ford Mustang is easy with an upper control arm from BMR Suspension. Stock control arms with soft rubber bushings deflect under load and absorb power instead of...$169.95 -
Launching harder, reducing wheel hop, and adding cornering consistency to your 2016-newer Chevrolet Camaro is easy with upper control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power...$229.95 -
Adjust camber and caster for maximum handling and performance with our adjustable arms for Corvettes, Impalas and 'Tri-5' Bodies. Arms include a steel cross shaft with street style or race pivots and ball joint plate. Street Style: Includes Steel Cross...$283.99 -
Since 1988 the BBK Performance brand has been synonymous with bolt on performance for modern muscle cars and trucks since its beginning in 1988. In fact it was our founders Brian & Ken Murphy that designed and developed the first aftermarket air...$369.99