Creates maximum performance and extreme mileage gains. The free flowing rear side exit exhaust system is constructed out of 2.25 in. mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a hassle free installation. Fits both...

Interested in a new exhaust system for your 6.7 L Power Stroke. Check out the ATLAS DPF-Back exhaust system by aFe. Constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow and uses high quality band clamps and OE-style bayonet...

Apollo GT Series 409 Stainless Steel Muffler Delete Pipe Dodge RAM 1500 (DS) 09-18 V8-5.7L Dodge RAM 1500 (DS) 09-18 V8-5.7L Fitment: DodgeRam 1500Laramie2009 DodgeRam 1500Laramie2010 DodgeRam 1500SLT2009 DodgeRam 1500SLT2010 DodgeRam...

This system produced gains of up to +10 HP and +17 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2" - 3" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability...

aFe power introduces the MACH Force-Xp cat-back exhaust system constructed out of 2.5" 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence,...

Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow,...

This Atlas Cat-Back exhaust system is constructed of 4 in. mandrel-bent steel. Comes with Tubing; OE Style bayonet hangers; band clamps and all hardware necessary for a hassle free installation. The smooth curves and increased diameter of this exhaust...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of...

This system produced gains of up to +6.45 HP and +8.12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off...

This DPF-back exhaust system is constructed of 5" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 6" diameter polished 304 stainless steel intercooled clamp-on exhaust tip. The tip...

This cat-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent brushed finish 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing a powerful sound. Muffler finish...

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust...

The new ATLAS exhaust was engineered to perform in the most extreme environments. Constructed from mandrel bent aluminized steel tubing for increased exhaust velocity, these systems are designed to maximize horsepower and torque gains, while lowering...

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel...

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP...

This MACH Force XP Hi-Tuck Axle-Back exhaust system is constructed of 2.5" mandrel-bent 409 stainless steel and comes complete with a free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP...

aFe's all new Scorpion series cat-back exhaust system for your 2007- 2017 Toyota FJ Cruiser with the V6-4.0L engine will get you there with speed and style. Designed from 2-1/2" mandrel bent, aluminized steel, this exhaust system offers greater flow to...

Emissions Disclaimer: This product does not require a CARB EO# Takeda 2-1/2 IN 304 Stainless Steel Cat-Back Exhaust System w/ Black Tips Infiniti Q50 16-19 V6-3.0L (tt) 2016-2019 Infiniti Q50 (Liter: 3.0 & Cylinder: 6 & Block:...

This MACH Force-Xp Cat-Back exhaust system is constructed of 2-1/2" to 3-1/2" mandrel-bent 409 stainless steel and comes complete with free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP...

This unique dual transverse exhaust system is constructed form mandrel bent stainless steel and is TIG welded. This system was designed and engineered by tuning the perfect tube lengths; ultimately maximizing performance across the power band while...

Creates maximum performance and extreme mileage gains. The free flowing rear side exit exhaust system is constructed out of 2.25 in. mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a hassle free installation. Fits both...

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Coronoa California manufacturing facility. This system uses factory mounting locations providing stability and hassle free...

This DPF-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 4-1/2 IN diameter black 304 stainless steel clamp-on exhaust tip. The tip features an...

Now your 2019 Dodge Ram 5.7 HEMI can perform and sound as good as it looks with this MACH Force Xp cat-back exhaust system. In-house dyno testing produced gains of up to +22 horsepower and +26 lbs. x ft. torque for towing, track and street performance...

Vulcan Series 2-1/2 IN to 3 IN Stainless Steel Cat-Back Exhaust System Black Toyota Tundra 2022 V6-3.5L (tt) Toyota Tundra 2022 V6-3.5L (tt)

Make the most out of your Jeep JL driving adventures with aFe's MACH Force-Xp mid-pipe with resonator delete. This system can be used with most aftermarket axle-back exhaust systems or with the factory tailpipe. 2-1/2" mandrel bent, 409 stainless steel...

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2"...

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel black muffler, producing a mild sound. The muffler has a black finish...

This cat-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent brushed finish 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing a powerful sound. Muffler finish...

This system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system deletes the factory mufflers, and produces an aggressive sound unleashing all available horsepower and torque. Cutting is...

ATLAS 5 IN Aluminized Steel DPF-Back Exhaust System w/Polished Tip RAM Diesel Trucks 19-20 L6-6.7L (td) RAM Diesel Trucks 19-20 L6-6.7L (td) Fitment: Ram2500Big Horn2019 Ram2500Big Horn2020 Ram2500Big Horn2021 Ram2500Big...

This cat-back exhaust system is constructed of 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a mild sound. Finishing off this exhaust system...

This Takeda exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The...

This Takeda "muffler-delete" axle-back exhaust system eliminates the OE restrictive muffler and delivers a deepened exhaust tone while increasing performance. Takeda 2-1/2 IN 304 Stainless Steel Axle-Back Exhaust System Subaru Crosstrek 18-19 H4-2...

3" 409 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Aggressive Sound: This system produces an aggressive sound unleashing all available...

5" Aluminized Steel Construction: This DPF-back exhaust system is constructed of 5" mandrel-bent aluminized steel tubing for maximum strength and durability. 7" Diameter Black Exhaust Tip: Finishing off this exhaust system is a 7" diameter black...

This system produced gains of up to +12 HP and +15 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system...

Emissions Disclaimer: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles. Magnum FORCE Stage-2 Cold Air Intake System w/ Pro 5R Media...

Momentum*s unique filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2* tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its...

This 7* tall 360-degree radial flow air filter features a 4* round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and track use. The included...

aFe Power now offers an intake cover to help reduce air intake noise. This cover is constructed of vacuum formed ABS plastic material that bolts right up to the intake housing. The aFe logo is front and center letting everyone know what brand of intake...

Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight...

This sealed intake system utilizes pre-oiled, large 7" tall radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The smooth one-piece sealed housing is used to eliminate the...

Get more useable power out of your FK8 Type R! The Takeda Momentum Pro DRY S Cold Air Intake outflows the factory intake, while allowing the car to breathe and perform to its greatest potential. This intake utilizes both the factory seal and air scoop,...

The aFe Super Stock air intake system is one of the simplest and effective ways to increase performance. This intake system features the high performance Pro 5R air filter for maximum flow and high filtration. Also included with this system is the...

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed...

6" Flange Massive Air Filter: This intake system utilizes a pre-oiled, 8" tall inverted top conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Dyno-Tuned...

Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow,...

A custom CAD designed roto-molded housing made from high quality cross-linked polyethylene plastic eliminates the use of multiple components and ensures the coolest air intake charge available. This housing is designed for a perfect fitment into the...

Quantum Cold Air Intake Systems (Patent Pending) by aFe POWER are the latest in airflow technology for your Ford Power Stroke 6.7L (td) truck. From the uniquely integrated Filter-to-Housing design to the state of the art, lightweight injection molded...

Emission Disclaimer: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle. Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S...

Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. Momentum HD Cold Air Intake System w/ Pro 10R Media...

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed...

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed...

Large Five Layer Performance Air Filter: This 9 IN tall 360-degree radial flow air filter features a 5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with...

This 6* tall 360-degree radial flow air filter features a 4-1/2* round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding...

This 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the...