-
-
-
UMI*s complete kit replaces the weak, factory stamped lower control arms and panhard bar with our heavy duty tubular setup. These direct bolt-on replacements minimize wheel hop, improve cornering while lowering ET's and helping track consistency. The...$239.99 -
This kit includes (1) set of our tubular single adjustable lower control arms and (1) set of our on-car adjustable upper control arms, "Ultimate Arms". Both items are direct replacements of the OEM set up adding strength, ride improvement and most ...$519.99 -
This kit includes (1) set of our tubular single adjustable lower control arms and (1) set of our on-car adjustable upper control arms, "Ultimate Arms". Both items are direct replacements of the OEM set up adding strength, ride improvement and most ...$519.99 -
Rear control arms are one of the most important suspension modifications that can be done to your GM vehicle. Stock control arms are on the borderline of "junk", bushing deflection and rusting weak stamped material add for traction loss and poor...$369.99 -
SuperPro14-19 Ford Fiesta ST Front Lower Control Arm Set w/ Preinstalled SuperPro Bushings$319.99 -
Skunk2 has done it again. While others are busy imitating our LCA*s, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Alpha Series...$216.84 -
-
GT350 Mustang Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the GT350 Ford Mustang, and allow for full articulation with the proper ball joint angle. The main arm is slotted to allow the use of pinch bolts,...$719.10 -
Camaro Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the 2016+ Chevrolet Camaro, and allow for full articulation with the proper ball joint angle. The main arm is slotted to allow the use of pinch bolts, and...$719.10 -
-
-
-
-
This kit includes (1) set of our tubular single adjustable lower control arms and (1) set of our on-car adjustable upper control arms, "Ultimate Arms". Both items are direct replacements of the OEM set up adding strength, ride improvement and most...$519.99 -
Superpro 05-11 Ford Focus LS/LT/LV Volvo S40/V50 and C70 Front Lower Control Arm Assembly Kit$399.99 -
Heavy duty control arms provides on car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance. Whiteline Control arm - lower arm assembly (camber/toe...$373.05 -
-
-
BMR 05-14 S197 Mustang Non-Adj. Lower Control Arms (Poly/Spher Combo) - Black Hammertone$249.95 -
-
-
-
Installation: Easy 1-hour bolt on installation requires no drilling, uses OEM hardware.$229.99 -
Skunk2 has done it again. While others are busy imitating our LCA*s, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Ultra Series...$317.82 -
gun drilled to reduce weight, then electroless nickel plated for corrosion resistance. Blue Anodized Titanium hardware shaves even more unsprung weight from the arms without compromising strength. Stainless Steel spacers are provided to correct roll...$719.10 -
SuperPro 2014 Subaru Forester 2.5i Touring Front Lower Control Arm Set w/ Bushings$379.99 -
New Hardware Kit: UMI offers the option to purchase new mounting hardware for installing lower control arms. This kit includes all needed Grade 8 hardware for installing one set of rear lower control arms. Please note, this hardware kit does not include...$379.99 -
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection. MOOG RK640891 Suspension - Bras de commande avant droit en bas 1998-2004 Toyota Tacoma (Front Right Lower)$124.99 -
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection. MOOG RK640892 Suspension - Bras de commande avant gauche en bas 1998-2004 Toyota Tacoma (Front Left Lower)$124.99 -
BMR 70-81 2nd Gen F-Body Front Upper/Lower Control Arm Hardware Kit - Zinc plated$37.95 -
Skunk2*s Clear Anodized Rear Lower Control Arms for the *01-*05 Civic are based off of the same technology the company*s been using on its own race cars for more than a decade and are a must-have for enthusiasts looking to fine-tune their suspension for...$227.29 -
-
Please contact us with any concerns or issues. Need a replacement rod end? SPL Parts Rod Ends Installation Instructions: SPL FLCA G29 Front Lower Control Arms Toyota Supra GR A90/BMW Z4 G29$719.10 -
BMR 05-14 S197 Mustang Non-Adj. Boxed Lower Control Arms (Polyurethane) - Black Hammertone$209.95 -
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection. MOOG RK622210 Bras de suspension assemble avec joint a rotule avant droit en bas 2014-2017 Honda Odyssey (Front Right Lower)$148.99 -
Rear control arms are one of the most important suspension modifications that can be done to your GM vehicle. Stock control arms are on the borderline of "junk", bushing deflection and rusting weak stamped material add for traction loss and poor...$369.99 -
-
-
-
Launching harder, reducing wheel hop, and adding cornering consistency to your 1999-2004 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead...$239.95 -
-
Some competitors may consider these "Race Only" control arms while we consider them Race Ready. Our double adjustable lower control arms feature TIG welded fabrication, reinforced sway bar holes and QA1 Endura Series Teflon lined spherical rod ends...$369.99 -
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection. MOOG RK640287 Suspension - Bras de commande avant droit en bas 2003-2005 Honda Civic (Front Right Lower)$77.56 -
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection. MOOG RK640288 Suspension - Bras de commande avant gauche en bas 2003-2005 Honda Civic (Front Left Lower)$77.56 -
This pair of rear lower control arms are direct replacements for weak or bent factory units. Made of 3/16" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise and...$367.95 -
Installation: Installs in approximately 30 minutes in factory mounting points using OEM hardware.$189.99 -
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection. MOOG RK623582 Bras de suspension assemble avec joint a rotule 2010-2017 GMC Terrain (Front Right Lower)$146.99 -
DV8 Offroad's A-Arm Skid Plate for the 2021+ Bronco was designed to protect the aluminum front, lower control arms from rocks and other obstacles on the trail. Made from 3.5mm steel and finished in a micro-texture black powder coat, it also shields the...$329.99 -
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection. MOOG RK622789 Bras de suspension assemble avec joint a rotule avant droit en bas 2011-2014 Subaru Impreza (Front Right Lower)$112.99 -
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection. MOOG RK622787 Bras de suspension assemble avec joint a rotule avant gauche en bas 2011-2014 Subaru Impreza (Front Left Lower)$112.99 -
Skunk2*s Hard Anodized Rear Lower Control Arms for the *01-*05 Civic are based off of the same technology the company*s been using on its own race cars for more than a decade and are a must-have for enthusiasts looking to fine-tune their suspension for...$227.29 -
A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated...$459.95 -
Installation: Easy 1-hour bolt on installation requires no drilling, uses OEM hardware.Installation: Easy 1-hour bolt on installation requires no drilling, uses OEM hardware.$229.99 -
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you...$594.05 -
The S197 chassis' stock lower control arms leave much to be desired and contribute to the inherent traction and wheel hop problems from the factory. Whiteline's adjustable lower control arms are made from tubular DOM steel with Forged Rod Ends for...$280.40 -
This series of adjustable trailing arms are designed to modify factory camber - toe and track on the rear of Subaru Impreza and Liberty. Use KTA107 as an economical solution for lack of rear toe adjustment particularly on Impreza GD-GH (MY01- on) series...$330.55 -
Whiteline's heavy duty adjustable rear lower front control arm kit designed to allow for increased range of toe adjustment. Low compliance bushings are used to minimise NVH and maximise longevity. Left-right-hand thread adjustment turn-buckle allows for...$281.25 -
KTA260 is heavy duty adjustable rear lower control arm kit designed to allow for increased range of toe adjustment. Low compliance bushings are used to minimise NVH and maximise longevity. Left-right-hand thread adjustment turn-buckle nut allows for easy...$221.75