-
-
This kit includes (1) set of our tubular single adjustable lower control arms and (1) set of our on-car adjustable upper control arms, "Ultimate Arms". Both items are direct replacements of the OEM...$519.99 -
Superpro 05-11 Ford Focus LS/LT/LV Volvo S40/V50 and C70 Front Lower Control Arm Assembly Kit$399.99 -
Heavy duty control arms provides on car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance...$438.88 -
-
BMR 05-14 S197 Mustang Non-Adj. Lower Control Arms (Poly/Spher Combo) - Black Hammertone$259.95 -
-
Installation: Easy 1-hour bolt on installation requires no drilling, uses OEM hardware.$229.99 -
Skunk2 has done it again. While others are busy imitating our LCA*s, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is...$317.82 -
gun drilled to reduce weight, then electroless nickel plated for corrosion resistance. Blue Anodized Titanium hardware shaves even more unsprung weight from the arms without compromising strength. ...$719.10 -
SuperPro 2014 Subaru Forester 2.5i Touring Front Lower Control Arm Set w/ Bushings$379.99 -
New Hardware Kit: UMI offers the option to purchase new mounting hardware for installing lower control arms. This kit includes all needed Grade 8 hardware for installing one set of rear lower control...$379.99 -
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection. MOOG RK640891 Suspension - Bras de commande avant droit en bas 1998-2004...$156.99$168.40 -
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection. MOOG RK640892 Suspension - Bras de commande avant gauche en...$156.99$168.40 -
BMR 70-81 2nd Gen F-Body Front Upper/Lower Control Arm Hardware Kit - Zinc plated$42.95 -
Skunk2*s Clear Anodized Rear Lower Control Arms for the *01-*05 Civic are based off of the same technology the company*s been using on its own race cars for more than a decade and are a must-have for...$227.29 -
-
Please contact us with any concerns or issues. Need a replacement rod end? SPL Parts Rod Ends Installation Instructions: SPL FLCA G29 Front Lower Control Arms Toyota Supra GR A90/BMW Z4 G29$719.10 -
BMR 05-14 S197 Mustang Non-Adj. Boxed Lower Control Arms (Polyurethane) - Black Hammertone$219.95 -
-
gun drilled to reduce weight, then electroless nickel plated for corrosion resistance. Blue Anodized Titanium hardware shaves even more unsprung weight from the arms without compromising strength. ...$764.10 -
Rear control arms are one of the most important suspension modifications that can be done to your GM vehicle. Stock control arms are on the borderline of "junk", bushing deflection and rusting weak...$369.99 -
-
-
-
This kit replaces both the rear upper and lower rear control arms on any 78-96 GM B-Body. Kit is designed to reduce traction loss and minimize wheel hop found with stock control arms. Control arms...$519.99 -
Launching harder, reducing wheel hop, and adding cornering consistency to your 1999-2004 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber...$249.95 -
Some competitors may consider these "Race Only" control arms while we consider them Race Ready. Our double adjustable lower control arms feature TIG welded fabrication, reinforced sway bar holes...$369.99 -
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection. MOOG RK640288 Suspension - Bras de commande avant gauche en...$98.19 -
This pair of rear lower control arms are direct replacements for weak or bent factory units. Made of 3/16" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a...$367.95 -
Installation: Installs in approximately 30 minutes in factory mounting points using OEM hardware.$189.99 -
DV8 Offroad's A-Arm Skid Plate for the 2021+ Bronco was designed to protect the aluminum front, lower control arms from rocks and other obstacles on the trail. Made from 3.5mm steel and finished in a...$329.99 -
Our 4th Gen Tundra A-Arm Skid Plates protect the lower control arms, the lowest hanging fruit on the front end, from damage while driving in rocky, off-road conditions. Carriage bolts are used to...$249.99$252.99 -
-
S550 Mustang Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the S550 Ford Mustang, and allow for full articulation with the proper ball joint angle. The...$719.10 -
Installation: Easy 1-hour bolt on installation requires no drilling, uses OEM hardware.Installation: Easy 1-hour bolt on installation requires no drilling, uses OEM hardware.$229.99 -
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the...$698.88 -
The S197 chassis' stock lower control arms leave much to be desired and contribute to the inherent traction and wheel hop problems from the factory. Whiteline's adjustable lower control arms are made...$329.88 -
This series of adjustable trailing arms are designed to modify factory camber - toe and track on the rear of Subaru Impreza and Liberty. Use KTA107 as an economical solution for lack of rear toe...$388.88 -
Whiteline's heavy duty adjustable rear lower front control arm kit designed to allow for increased range of toe adjustment. Low compliance bushings are used to minimise NVH and maximise longevity...$330.88 -
KTA260 is heavy duty adjustable rear lower control arm kit designed to allow for increased range of toe adjustment. Low compliance bushings are used to minimise NVH and maximise longevity...$260.88 -
KTA124 is a complete kit of 4 adjustable control arms fitted with low compliance bushings designed to modify rear factory camber - toe and track. The result is greater range and more precise...$626.88 -
Adjustable lower control arms feature a light weight (1.72kg/3.8lbs per complete arm) stamped steel design. Adjusts via cam bolt and eccentric bushing for in-field adjustment versatility...$357.88 -
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the...$609.88 -
The S197 requires geometry correction once the rear of the car has been lowered to correct the rear lower control arm angles. Whiteline's rear control arm brackets relocate the control arms to...$213.88 -
The S197 chassis' stock lower control arms leave much to be desired and contribute to the inherent traction and wheel hop problems from the factory. Whiteline's lower control arms are made from...$224.88 -
The S197 chassis third link set up has suffered from brake hop and axle tramp with the stock arm and the ultra-compliant stock bushing is designed for comfort and leaves something desired for...$211.88 -
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the...$629.88 -
Especially on lowered vehicles where rear camber alignment is a must, achieving that desired camber setting is hindered by lack of factory toe adjustment. Whiteline KTA147 allows for precise toe...$427.88 -
The S197 chassis third link set up has suffered from brake hop and axle tramp with the stock arm and the ultra-compliant stock bushing is designed for comfort and leaves something desired for...$231.88 -
KTA135 is a complete kit of 2 adjustable control arms fitted with zero compliance bearings designed to modify factory camber and track on the rear of Mitsubishi Lancer EVO 10. The result is greater...$522.88 -
This series of adjustable trailing arms are designed to modify factory camber - toe and track on the rear of Subaru Impreza and Liberty. Use KTA107 as an economical solution for lack of rear toe...$648.88 -
This series of adjustable trailing arms are designed to modify factory camber - toe and track on the rear of Subaru Impreza and Liberty. Use KTA107 as an economical solution for lack of rear toe...$648.88 -
Heavy duty adjustable alloy rear lower front control arms designed to allow for increased range with easy on-car toe adjustment. Low compliance bushings are used to minimise NVH and maximise...$299.88