EBC 86-89 Mazda RX7 2.4 (1.3 Rotary)(Vented Rear Rotors) Redstuff Front Brake Pads

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation. Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent. DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty 93 thru 96 MAZDA RX7 2.6 Twin Turbo (1.3 Rotary)(Vented Rear Rotors) Fitment: MazdaRX-710th Anniversary1988 MazdaRX-7Base1986 MazdaRX-7Base1987 MazdaRX-7Base1991 MazdaRX-7Base1993 MazdaRX-7Base1994 MazdaRX-7Base1995 MazdaRX-7Base 2+21987 MazdaRX-7Convertible1988 MazdaRX-7Convertible1989 MazdaRX-7Convertible1990 MazdaRX-7Convertible1991 MazdaRX-7GTU1988 MazdaRX-7GTU1989 MazdaRX-7GTU1990 MazdaRX-7GTUs1989 MazdaRX-7GTUs1990 MazdaRX-7GXL1986 MazdaRX-7GXL1987 MazdaRX-7GXL1988 MazdaRX-7GXL1989 MazdaRX-7GXL1990 MazdaRX-7GXL 2+21987 MazdaRX-7GXL 2+21988 MazdaRX-7GXL 2+21989 MazdaRX-7GXL 2+21990 MazdaRX-7LX1987 MazdaRX-7LX 2+21987 MazdaRX-7R11993 MazdaRX-7R21994 MazdaRX-7R21995 MazdaRX-7SE1988 MazdaRX-7SE 2+21988 MazdaRX-7Sport1987 MazdaRX-7Touring1993 MazdaRX-7Touring1994 MazdaRX-7Touring1995 MazdaRX-7Turbo1986 MazdaRX-7Turbo1987 MazdaRX-7Turbo1988 MazdaRX-7Turbo1989 MazdaRX-7Turbo1990 MazdaRX-7Turbo1991