Replaces the fuel filter/regualtor on the bottom of the E46 BMW. Uses Radium's high-flow fuel filter and adjustable fuel pressure regulator. All fittings and hardware included. E85 compatible. Installation instructions available at www.radiumauto.com

Drop-in surge tank system for competition fuel cells. Designed for Walbro F90000-series pumps (no pumps included). Easily serviceable with new lift-out fuel pump modules. Installation instructions available at www.radiumauto.com

400lph Inline High Flow Fuel Pump. 400LPH@40psi, 300LPH@120psi. M18x1.5 Inlet & M12x1.5 Outlet. Includes Fuel Pump, installation instructions, check valve fitting, wiring terminal ends/covers/nuts.

320lph High Flow In-Tank Fuel Pump (Offset Inlet, Inline) . 320lph@43psi. Includes Fuel Pump, installation instructions, wiring harness, pre filter, internal fuel hose & clamps, end cap and rubber buffer sleeve. Included hardware is not application...

320lph E85-Compatible High Flow In-Tank Fuel Pump (Offset Inlet, Inline). 320lph@43psi. Includes Fuel Pump, installation instructions, wiring harness, pre filter, internal fuel hose & clamps, end cap and rubber buffer sleeve. Included hardware is...

2016-on Polaris RZR Turbo Replacement High Flow In-Tank Fuel Pump. 245LPH@40PSI / 202LPH@58PSI. Includes Fuel Pump, installation instructions, pre filter. NOTE: Fits TURBO MODEL ONLY

Drop-in fuel pump hanger assembly for Nissan vehicles. Pumps not included. Installation instructions available at www.radiumauto.com

380lph Inline High Flow Fuel Pump. 380lph@43psi, 270LPH@120psi. -10AN Inlet & -6AN Outlet. Includes Fuel Pump, installation instructions, -6AN to -8AN check valve fitting, wiring terminal ends/covers/nuts. Included hardware is not application...

320lph E85-Compatible High Flow In-Tank Fuel Pump (65mm Short Offset Inlet with hooks, Inline). 320lph@43psi. Includes Fuel Pump, installation instructions, wiring harness, pre filter and o-rings. Included hardware is not application specific. 340lph...

In-tank fuel hanger surge tank for the Mazda RX-7 (FD generation). Can be set up with multiple pumps. Designed to eliminate any chance of fuel pump starvation during aggressive driving. Can be used with factory or aftermarket fuel lines. See website for...

Universal Adjustable Fuel Pressure Regulator. Black. Inlet: 2 X -6 (9/16-18) Outlet: -6 (9/16 in-18) Gauge Port: 1/8 inNPT Universal Adjustable Fuel Pressure Regulator, Black Anodized, Inlet 2 X -6 (9/16-18), Outlet -6 (9/16-18), Gauge Port 1/8-inch NPT

In-tank fuel pump hanger for the Civic and Integra. For use with Walbro GSS342 or AEM 50-1000/1200 pumps (or similar). Installation instructions available at www.radiumauto.com

Drop-in fuel pump hanger for the Mark 4 Toyota Supra. Can hold up to three fuel pumps. E85 compatible. Installation instructions available at www.radiumauto.com

High Volume Fuel Rail. Black. Honda D16Y7 & D16Y8 High Volume Fuel Rail, Black Anodized, Fits Honda D16Y7 and D16Y8...

High Volume Fuel Rail. Black. Honda F22A1, F22A4, F22A6, H22A1, H22A4 & H23A1 High Volume Fuel Rail, Black Anodized, Fits Honda F22A1, F22A4, F22A6, H22A1, H22A4 and H23A1 engines Fitment: HondaAccord10th...

Drop-in fuel pump hanger for the Nissan R32 GT-R. This unique hanger features an integrates surge tank system with a lift pump and main pumps to make sure fuel starvation does not occur during hard driving. See more details at www.radiumauto...

Drop-in surge tank system for competition fuel cells. Can be used with up to three fuel pumps. Easily serviceable with new lift-out fuel pump modules. Compatible only with pumps listed. Pumps sold separately. Installation instructions available at www...

Drop-in fuel pump hanger with built-in anti-starvation surge tank. Set up to use Walbro "255" style pumps. Installation instructions available at www.radiumauto.com

100 PSIg Brass Sensor Kit. Brass Sensor Body. 1/8 in NPT Male Thread. Includes: 100 PSIg Brass Sensor, Connector & Pins 100 PSIg Brass Sensor Kit, Brass Sensor Body, 1/8-inch NPT Male Thread, Includes 100 PSIg Brass Sensor, Connector and Pins

150 PSIg Brass Sensor Kit. Brass Sensor Body. 1/8 in NPT Male Thread. Includes: 150 PSIg Brass Sensor, Connector & Pins 150 PSIg Brass Sensor Kit, Brass Sensor Body, 1/8-inch NPT Male Thread, Includes 150 PSIg Brass Sensor, Connector and Pins

Bosch LSU 4.2 Wideband UEGO Replacement Sensor Bosch LSU 4.2 Wideband UEGO Replacement Sensor, Sensor Only

75 PSIa or 5 Bar Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 75 PSIa or 5 Bar Stainless Sensor, Connector, Pins, 1/8 in NPT to -4 Adapter & 1/8 in NPT to 3/16 in Barb Adapter 75 PSIa or 5 Bar Stainless Sensor...

Air Temp Sensor Kit. 3/8 inNPT. Includes: Air Temp Sensor, 3/8 inNPT Aluminum Bung, Connector & Pins Air Temp Sensor Kit, 3/8-inch NPT, Includes Air Temp Sensor, 3/8-inch NPT Aluminum Bung, Connector and Pins

50 PSIa or 3.5 Bar Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 50 PSIa or 3.5 Bar Stainless Sensor, Connector, Pins, 1/8 in NPT to -4 Adapter & 1/8 in NPT to 3/16 in Barb Adapter 50 PSIa or 3.5 Bar Stainless...

Water Temp Sensor Kit. 1/8 in NPT. Includes: Water Temp Sensor, Plug, Pins & Pin Lock Water Temp Sensor Kit, 1/8-inch NPT, Includes Water Temp Sensor, Plug, Pins and Pin Lock

100 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 100 PSIg Stainless Sensor, Connector, Pins & 1/8 in NPT to -4 Adapter 100 PSIg Stainless Sensor Kit, Stainless Steel Sensor Body, 1/8-inch NPT Male Thread,...

150 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 150 PSIg Stainless Sensor, Connector, Pins & 1/8 in NPT to -4 Adapter 150 PSIg Stainless Sensor Kit, Stainless Steel Sensor Body, 1/8-inch NPT Male Thread,...

Fluid Temperature Sensor DTM-Style Kit. Includes 1/8 in NPT Temperature Sensor with High Performance DTM-Style Connector, Aluminum Bung, Connector & Pins Fluid Temperature Sensor DTM-Style Kit, Includes 1/8-inch NPT Temperature Sensor with High...

Air Temp Sensor DTM-Style Kit. Includes 1/8 in NPT Air Temperature Sensor with High Performance DTM-Style Connector, Aluminum Bung, Connector & Pins Air Temperature Sensor DTM-Style Kit, Includes 1/8-inch NPT Air Temperature Sensor with High...

Ethanol Content Flex Fuel Sensor Kit (-6 AN). -6 AN Fittings. Includes: Flex Fuel Content Sensor, -6 AN Fittings, Connector, Terminals & Wire Seals Ethanol Content Flex Fuel Sensor Kit with -6 AN Fittings, Includes Flex Fuel Content Sensor, -6 AN...

8-Channel K-Type Thermocouple EGT/Temperature Sensor Module with CANbus connectivity, includes CAN Module, DTM connector plug, Velcro tab for mounting and instructions.

Wideband UEGO Sensor with Stainless Tall Manifold Bung Install Kit - 4 Channel Wideband Bosch 4.2LSU Wideband UEGO Sensor with Stainless Tall Manifold Bung Install Kit for 4 Channel Wideband Controller PN 30-2340

Stainless steel Water/Methanol Injection Solenoid that eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. High flow capability (3,600cc/min) and an low current draw of only 0.75A

2000 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 2000 PSIg Stainless Sensor, Connector, Pins & 1/8 in NPT to -4 Adapter 2000 PSIg Stainless Sensor Kit, Stainless Steel Sensor Body, 1/8-inch NPT Male...

15 PSIa or 1 Bar Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 15 PSIa or 1 Bar Stainless Sensor, Connector, Pins, 1/8 in NPT to -4 Adapter & 1/8 in NPT to 3/16 in Barb Adapter 15 PSIa or 1 Bar Stainless Sensor...

500 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 500 PSIg Stainless Sensor, Connector, Pins & 1/8 in NPT to -4 Adapter 500 PSIg Stainless Sensor Kit, Stainless Steel Sensor Body, 1/8-inch NPT Male Thread,...

75 PSIa or 5 Bar Brass Sensor Kit. Brass Sensor Body. 1/8 in NPT Male Thread. Includes: 75 PSIa or 5 Bar Brass Sensor, Connector & Pins 75 PSIa or 5 Bar Brass Sensor Kit, Brass Sensor Body, 1/8-inch NPT Male Thread, Includes 75 PSIa or 5 Bar...

100 PSIa or 7 Bar Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8" NPT Male Thread. Includes: 75 PSIa or 5 Bar Stainless Sensor, Connector, Pins, 1/8" NPT to -4 Adapter & 1/8" NPT to 3/16" Barb Adapter

50 PSIa or 3.5 Bar Brass Sensor Kit. Brass Sensor Body. 1/8 in NPT Male Thread. Includes: 50 PSIa or 3.5 Bar Brass Sensor, Connector & Pins 50 PSIa or 3.5 Bar Brass Sensor Kit, Brass Sensor Body, 1/8-inch NPT Male Thread, Includes 50 PSIa or 3.5 Bar...

30 PSIa or 2 Bar Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 30 PSIa or 2 Bar Stainless Sensor, Connector, Pins, 1/8 in NPT to -4 Adapter & 1/8 in NPT to 3/16 in Barb Adapter 30 PSIa or 2 Bar Stainless Sensor...

AEM Single K-Type Thermocouple Kit - 2 Pack

AEM Single K-Type Thermocouple Kit - 4 Pack

Bosch LSU 4.2 Wideband UEGO Installation Kit. Includes: Bosch LSU 4.2 Wideband UEGO Sensor, Weld-On Bung, Connector, Wire-Seals & Pins Bosch LSU 4.2 Wideband UEGO Installation Kit, Includes: Bosch LSU 4.2 Wideband UEGO Sensor, Weld-On Bung,...

RTD Exhaust Gas Temperature Sensor Kit, 90-Degree Platinum Closed Tip Design with Inconel 601 Coating, -40?C to 850?C Temperature Range, M14x1.5 Thread w/ Bung, 2-Pin DTM Connector (Mating Connector Not Included)

1000 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 1000 PSIg Stainless Sensor, Connector, Pins & 1/8 in NPT to -4 Adapter 1000 PSIg Stainless Sensor Kit, Stainless Steel Sensor Body, 1/8-inch NPT Male...

AEM Dryflow Pre-Filters are manufactured from a durable micro-screen material and pretreated with a proprietary hydrophobic process designed to prevent splashes of water or mud from saturating your Dryflow air filter. AEM Dryflow Pre-filters also stop...

AEM Dryflow Air Filters were developed in collaboration with K&N, the inventor of High Flow Air Filters. We adopted some of the best elements of cotton air filters into a new generation synthetic Dryflow Air filter. The three-dimensional filtering...

AEM Brute Force Dryflow Air Filters are specially designed for tough off-road applications. They provide outstanding levels of filtration efficiency and capacity. AEM Brute Force Air Filters are oil-free and their synthetic media is incredibly easy to...

AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning,...

AEM Dryflow Air Filters were developed in collaboration with K&N, the inventor of High Flow Air Filters. We adopted some of the best elements of cotton air filters into a new generation synthetic Dryflow Air filter. The three-dimensional filtering...

AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning,...

AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning,...

AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning,...

AEM Brute Force Dryflow Air Filters are specially designed for tough off-road applications. They provide outstanding levels of filtration efficiency and capacity. AEM Brute Force Air Filters are oil-free and their synthetic media is incredibly easy to...

AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning,...

AEM's 21-5011 is ideal for engine swaps when a custom intake is required. It comes with an AEM Dryflow Air Filter, three 4 inch diameter aluminum tube bends, one straight 36 inch long, 4 inch diameter tube, seven couplers, a weld-on mass air flow sensor...

AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning,...

AEM Dryflow Air Filters were developed in collaboration with K&N, the inventor of High Flow Air Filters. We adopted some of the best elements of cotton air filters into a new generation synthetic Dryflow Air filter. The three-dimensional filtering...

The AEM-26-3005C Charge Pipe is a free-flowing, mandrel-bent aluminum tube charge pipe kit designed to replace the restrictive factory intercooler piping on specific turbo charged Toyota Supra GR models and offer a wide range of performance customization...

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM...