ADD Offroad Ram TRX PRO Bolt-On Rear Bumper brings the same extremely low profile design of the front bumper to the rear of the truck. It was designed to flow flawlessly with the lines of your truck. Manufactured with a tubular steel frame coupled with...

The Stealth Fighter Bronco Front Skid Plate replaces the stock plastic OEM skid plate. Manufactured from 3/16-inch aluminum alloy, it protects the front underbelly of your Bronco in a way that plastic cannot. As always, this skid is fully bolt-on and...

For those who are looking for a sleek, low-profile front bumper for their 2021 Bronco, the Stealth Fighter hits the mark. Designed for performance and clearance off-road, it also brings bold styling to the front end. At the center of the bumper are inset...

The Race Series Chase Rack brings a race-inspired look to the bed of your TRX. Sitting atop the rack is an actuator-controlled mounting point for a 50-inch light bar. This enables you to raise and lower your light bar to fit in your garage or other...

The Stealth Fighter Rear Bumper has a low-profile, modern plate steel design that stays tight to the rear of the Bronco. There are two mounting points for rear-facing cube lights, and an integrated license plate mount that also retains the license plate...

The ADD Offroad Bomber Front Bumper for the Ford Raptor & Raptor R has been the king of aftermarket Raptor bumpers for years. We've brought the Bomber to the 3rd-gen Raptor, keeping it true to it's low-profile, aggressive styling. Constructed from...

The Stealth Fighter has been our most popular line of bumpers, and for good reason. It is one of our tightest fitting bumpers and is synonymous with the Raptor in the off-road community. This was designed to closely follow the Raptor's body lines, and...

The Stealth Fighter Raptor Rear Bumper for 2021-2023 models was designed to be one of our slimmest fitting bumpers, that follows the body lines of your Raptor and complements the factory dovetail style. Constructed from modern radius plate steel, it has...

The HoneyBadger front bumper is known for its sharp angles and rugged style. This bumper is available with, or without a top hoop. The top of the bumper has a light mount for a 30-inch radius LED light bar. An additional 20-inch LED light bar can be...

The HoneyBadger front bumper is known for its sharp angles and rugged style. This bumper is available with, or without a top hoop. The top of the bumper has a light mount for a 30-inch radius LED light bar, which is partially protected by the top hoop...

If you're like us, you want your Raptor to be able to go anywhere and do anything. That's why we offer the 3rd Gen Ford Raptor Stealth Fighter Front Bumper Winch Kit. This kit enables your Raptor to accommodate a winch, so you can be prepared for...

This bracket was designed to relocate the Adaptive Cruise Control sensor behind the grille to make room for your ADD Offroad Bronco Front Bumper. This bracket could also be used for other aftermarket front bumpers; but why would you want to buy anything...

Transform the front of your Jeep with the Addictive Desert Designs Rock Fighter front bumper. The Rock Fighter is a stubby width bumper, meaning it will look good with any aftermarket fender you want to put on your JL. The patented universal light mount...

Sleek, tough, and ready to take on anything, the 3rd Gen Tundra Stealth Fighter Rear Bumper is perfect for anyone who wants to add a little extra edge to their truck. With its mid-width design and integrated light pod mounts, this bumper is sure to turn...

The Rock Fighter Skid Plate replaces the stock plastic OEM skid plate. Made from 3/16-inch aluminum alloy, it provides protection to the whole front underbelly of your Bronco. As always, this is fully bolt-on and Made in America. Rock Fighter Skid Plate;...

The Pro-Bolt On Front Bumper for the 2021-2023 Ford F-150 is our slimmest fitting bumper and was constructed in a prerunner style, giving your truck a serious but stylish look. Constructed with a heavy-duty .120-inch wall steel tube that fits right up...

The GMC Sierra 1500 has never looked better with the Stealth Fighter front bumper. A radius plate steel design gives your GMC Sierra added front end protection without all the extra bulk. Matching the GMC 1500 body lines, the Stealth Fighter is a tight...

Combining aesthetics with functionality, the ADD PRO frame cut Ford Raptor front bumper doesn't sacrifice the look of your truck for approach angle. The ADD PRO front bumper contours the body lines of the Raptor. Built with .120"" wall steel tubing for...

With modified trucks, placing a full-size spare in the OEM location is sometimes impossible. Addictive Desert Designs has designed a universal tire carrier that will fit most modern truck beds. It is sized for up to a 40" tall and 14" wide tire. These...

The Capture fairlead system holds your hook in place when not in use, giving you the ultimate form and function. Our hook capture system keeps your hook from dangling outside your vehicle making a clean and low profile front end. Built from 1 5/16" thick...

This Add-On Light Hoop brings the ability to mount four additional 6" round lights to your ADD PRO frame cut front bumpers for the Ford Raptor. The hoop is constructed from .120" wall tubing and maintains the same low profile look that the bumper has...

The Addictive Desert Designs Bomber rear bumper features a clean, modern look. The plate steel construction offers strength, while remaining low profile. The angles meet perfectly with the body lines of the vehicle to make it look as though it was there...

The Bomber is a tight fitting front bumper for the new Bronco, that follows the contours of the body perfectly. At the center of the bumper, is a satin black aluminum panel that frames 3 mounting points for Rigid 360 6-inch lights (also available with...

The ADD Pro Bolt-On Rear Bumper for the 2021+ Ford F-150 Raptor was constructed from .120-inch wall steel tubing, and provides durable protection to the rear of your truck. The top plate is constructed from CNC cut aluminum, and finished with a satin...

The ADD PRO Bolt-on Rear Bumper for the 2021-2023 Ford Bronco was designed with the tightest tolerances in order to flow perfectly with the contours of the body. Several .120-inch steel tubes with ?-inch steel plating form the structure of the bumper,...

Addictive Desert Designs Toyota Tacoma Stealth Fighter rear bumper is one of the slimmest bumpers on the market. The Stealth Fighter adds protection with a unique style without adding bulk or size to the Tacoma. Two rear facing cube light mounts come...

The ADD PRO Bolt-on bumper stays flush with the front your Toyota Tacoma. The PRO Bolt-on truly contours the body lines of the Tacoma without the need for a plastic valence. Built with .120? wall steel tubing for strength and durability and an aluminum...

Relocates your adaptive cruise control module on your Ford F-150 to be compatible with all Addictive Desert Designs front bumpers. Ford F150 Adaptive Speed Control Relocation Bracket in Hammer Black (May not work with Platinum Edition) Hammer black...

The Stealth Fighter Front Bumper is a low-profile plate steel design. The radiused front end keeps it tight to the front of your Ram TRX while following key bodylines to make it look like it belongs from the factory. A universal light mount system allows...

The Stealth Fighter Rear Bumper has a modern plate steel design that provides an aggressive look without being bulky. Clean lines and angles compliment the factory bodylines to give it a low-profile feel. Two rear facing cube light mounts are featured...

The Stealth Fighter Chase Rack brings a sleek plate steel design to the bed of your Ram TRX. The curve of the rack follows the lines of the cab perfectly and gives the option to mount a forward facing 50" light bar. A cutout in the cross member also...

Give the front end of your Ram TRX the utility and menacing look that accompanies the Addictive Desert Designs Bomber Front Bumper. The modern plate steel design brings aggressive styling while keeping clearance loss at a minimum. The center plate...

The Addictive Desert Designs Bomber Rear Bumper takes the same low profile plate steel design from the front bumper and brings it to the rear of the truck. Unique styling is combined with unrivaled quality to deliver a product that follows bodylines and...

The Rock Fighter Skid Plate replaces the stock plastic OEM skid plate. Made from 3/16-inch aluminum alloy, it provides protection to the whole front underbelly of your Bronco. As always, this is fully bolt-on and Made in America. Rock Fighter Skid Plate;...

This bracket was designed to relocate the Adaptive Cruise Control sensor behind the grille to make room for your ADD Offroad Bronco Front Bumper. This bracket could also be used for other aftermarket front bumpers; but why would you want to buy anything...

Transform the front of your Jeep with the Addictive Desert Designs Rock Fighter front bumper. The Rock Fighter is a stubby width bumper, meaning it will look good with any aftermarket fender you want to put on your JL. The patented universal light mount...

Combining aesthetics with functionality, the ADD PRO Bolt-On Ford Raptor front bumper doesn't sacrifice the look of your truck for approach angle. Our ADD PRO bumper gives your truck maximum approach angle for your off-road adventures without relocating...

This conversion kit enables your TRX Stealth Fighter Front Bumper to accommodate a winch. The winch mount bolts directly to the truck's frame to ensure maximum strength when in use, and is concealed behind the winch plate. The oil cooler is safely...

Complimenting the styling and aesthetics of the ADD PRO front bumper, the Ford Raptor ADD PRO Bolt-On rear bumper matches the slim look the PRO offers for the rear of your truck. Built with .120" wall steel tubing for strength and durability and an...

Heavy duty trucks call for heavy duty bumpers. The RAM 2500/3500 Bomber HD rear bumper takes the rugged plate steel design from the front bumper and brings it to the rear of the truck. Our reinforced clevis mounts provide a mounting point for 3/4"...

Made with plate steel and constructed in a modern box design, the HoneyBadger Raptor Rear Bumper provides superior protection. It's designed to flow with the Raptor's body lines tightly. Its factory dual exhaust and tow hooks fit comfortably below the...

The Dodge RAM 1500 has never looked better with the Stealth Fighter front bumper. A radius steel plate design gives your RAM truck added front end protection without all the extra bulk. Matching the RAM 1500 factory body lines, the Stealth Fighter front...

ADD Offroad's Ram TRX PRO Bolt-On Front Bumper has the lowest profile and highest clearance possible, while still protecting the front end of your truck. The center of the bumper features inset mounting points for 8 cube lights or a 30-inch radius light...

The frame reinforcement kit for the Ford F-150/Raptor gives your OEM frame horns the additional strength they need when using a winch or D-rings. They are fully bolt-on and are compatible with the OEM and all Addictive Desert Designs bumpers. Ford ...

The Bomber Front Skid Plate was designed to replace the plastic OEM skid plate, and flow with the contours of our Bomber Bronco Front Bumper. It is constructed from 3/16-inch aluminum alloy, and finished in a satin black powder coat to protect it from...

ADD Offroad?s Light Hoop Add-On for the Ram TRX PRO Bolt-On Front Bumper enables you to add additional lighting on your bumper. Our hoop has 4 mounting locations for 6-inch round lights. As always, this has a fully bolt-on installation and is Made in...

"Addictive Desert Designs Jeep Gladiator Stealth Fighter rear bumper is one of the slimmest bumpers on the market. The low profile plate steel design provides a unique style without adding bulk or size to the Gladiator. Jeep Gladiator JT Stealth Fighter...

The new Honey Badger Front Bumper is just as durable as it is versatile. Its wrap-around design, laser cut finish, and 3/16 in. Mild Steel Construction offers precision built quality along with added strength. As with all of our products, you have plenty...

Addictive Desert Designs Stealth Fighter rear bumper is one of the slimmest bumpers you can buy for your Raptor. Measuring the same length from the tailgate as the factory bumper, the Stealth Fighter adds protection to your truck without adding bulk and...

A redesigned Race Series R chase rack specifically made for the 2017 Ford Raptor adds a head turning style to your Ford Raptor. With all the same benefits and features of our original Race Series R chase rack, the 2017 Raptor version has an upgraded...

"The Stealth Fighter front bumper for the Ford F-150 is one of our tightest fitting and most aggressive looking bumpers on the market. A modern radius plate design allows the Stealth Fighter to keep a tight fit around the front of your truck to match...

The Stealth Fighter front bumper for the Ford F-150 is one of our tightest fitting and most aggressive looking bumpers on the market. A modern radius plate design allows the Stealth Fighter to keep a tight fit around the front of your truck to match the...

Addictive Desert Designs Stealth Fighter front bumper for the 2017 Ford Raptor is one of our tightest fitting and most aggressive looking bumpers on the market. Measuring only 0.5 in. farther from the grille than the factory bumper the Stealth Fighter...

Addictive Desert Designs Stealth Fighter front bumper for the Toyota Tacoma is one of our best fitting and most aggressive looking bumpers on the market. A modern radius plate design allows the Stealth Fighter to keep a tight fit around the front of the...

The Addictive Desert Designs Bomber rear bumper features a clean look, meeting perfectly with the OEM body lines. The plate steel construction provides strength without adding bulk. Reinforced clevis mounts give a mounting point for 3/4" D-Rings. Give...

The newly redesigned Addictive Desert Designs HoneyBadger Front Bumper keeps the same rugged styling as the original but with a low-profile fitment. There is an optional top hoop, but either configuration has room to mount a radius 30" light bar on top...

The Stealth Fighter rear bumper takes the same styling as the front bumper and brings it to the rear of your Ford F-150. The plate steel design gives aggressive angles while still maintaining a low-profile look. OEM amenities, such as parking sensors and...

The Stealth Fighter is a plate steel bumper with a radiused front edge that keeps it tight to the truck. There is a universal light mount system in the center of the bumper that holds up to a 40" radius light bar or 10 cube lights. Each side panel has a...

The Addictive Desert Designs Stealth Fighter rear bumper is a plate steel bumper that offers superior rear end protection. The low-profile design keeps it tight to the rear of the Jeep JK, providing a sleek appearance. OEM amenities, such as backup...

The Rock Fighter Bronco Rear Bumper was designed to flow seamlessly with the contours of the rear end. It's low profile, modern plate steel construction is perfect for crawling rocks on the trail. The Rock Fighter retains the OEM tire mount & backup...