3 Channel Coil Driver 3 Channel Ignition Coil Driver For Driving Dumb Ignition Coils

Boost Control Solenoid Kit. Includes: Boost Control Solenoid, 2 X 1/8 in NPT to 3/16 in Barb Adapter & Muffler Boost Control Solenoid Kit, Includes 3-Port Boost Control Solenoid, 2 X 1/8-inch NPT to 3/16-inch Barb Adapter and Muffler

Exhaust Back Pressure Sensor Install Kit Exhaust Back Pressure Sensor Install Kit, For Use with AEM Wideband AFR Controllers When Reading AFR Pre-Turbo

The 6 Channel CAN Sensor Module converts two analog temp channels, two analog pressure channels, a tach input and fuel level input to AEMnet CAN messages

PDU-8, 8 CHANNEL CAN PDU Four 20A and four 10A high-side 12V outputs Fully-sealed, waterproof billet-aluminum enclosure

4 Channel Coil Driver 4 Channel Ignition Coil Driver For Driving Dumb Ignition Coils

DTM-Style 2-Way Connector Kit. Includes Plug, Receptacle, Plug Wedge Lock, Receptacle Wedge Lock, 3 Female Pins & 3 Male Pins DTM-Style 2-Way Connector Kit, Includes Plug, Receptacle, Plug Wedge Lock, Receptacle Wedge Lock, 3 Female Pins and 3 Male...

Torque Solution Fast Response SD IAT Sensor Kit GM Style IAT Sensor w/ Pigtail & Aluminum Weld Bung

Air Temperature Sensor - 3/8" NPT Air Temperature Sensor used in EZ Fuel and EZ Fuel + Ignition Throttle Bodies 3/8" x 18 NPT Thread with 2 male terminals. Also 30086

The FAST Digital Fluid Temperature Sensor Kit provides a simple and cost effective way to measure fluid temperatures and then convert to a universal 0-5V output, perfect for any data logger or engine computer. Designed around the widely available GM...

Innovate High Resolution MAC Solenoid

The SSI-4 PLUS will allow the capture of data from 4 external sensors. These sensors can be frequencies such as engine RPM and speed sensors or 0-5V references like MAP sensors and pressure transducers. The SSI-4 PLUS may be used as a stand-alone system...

The TC-4 PLUS is 4 channel type-K thermocouple amplifier device that can be used a stand-alone system or as part of a MTS (Modular Tuning System). The TC-4 PLUS includes a digital input/output, 4 full-programmable analog outputs, and is ideal for...

Plug & Play 4 BAR MAP Sensor for SSI-4 PLUS. Plug & Play 4 BAR MAP Sensor

Plug & Play 0-150 PSI (10 BAR) Air/Fluid Pressure Sensor for SSI-4 PLUS Plug & Play 0-150 PSI Pressure Sensor (Fluid and Air)

100 PSIg Brass Sensor Kit. Brass Sensor Body. 1/8 in NPT Male Thread. Includes: 100 PSIg Brass Sensor, Connector & Pins 100 PSIg Brass Sensor Kit, Brass Sensor Body, 1/8-inch NPT Male Thread, Includes 100 PSIg Brass Sensor, Connector and Pins

150 PSIg Brass Sensor Kit. Brass Sensor Body. 1/8 in NPT Male Thread. Includes: 150 PSIg Brass Sensor, Connector & Pins 150 PSIg Brass Sensor Kit, Brass Sensor Body, 1/8-inch NPT Male Thread, Includes 150 PSIg Brass Sensor, Connector and Pins

Bosch LSU 4.2 Wideband UEGO Replacement Sensor Bosch LSU 4.2 Wideband UEGO Replacement Sensor, Sensor Only

75 PSIa or 5 Bar Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 75 PSIa or 5 Bar Stainless Sensor, Connector, Pins, 1/8 in NPT to -4 Adapter & 1/8 in NPT to 3/16 in Barb Adapter 75 PSIa or 5 Bar Stainless Sensor...

Air Temp Sensor Kit. 3/8 inNPT. Includes: Air Temp Sensor, 3/8 inNPT Aluminum Bung, Connector & Pins Air Temp Sensor Kit, 3/8-inch NPT, Includes Air Temp Sensor, 3/8-inch NPT Aluminum Bung, Connector and Pins

50 PSIa or 3.5 Bar Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 50 PSIa or 3.5 Bar Stainless Sensor, Connector, Pins, 1/8 in NPT to -4 Adapter & 1/8 in NPT to 3/16 in Barb Adapter 50 PSIa or 3.5 Bar Stainless...

Water Temp Sensor Kit. 1/8 in NPT. Includes: Water Temp Sensor, Plug, Pins & Pin Lock Water Temp Sensor Kit, 1/8-inch NPT, Includes Water Temp Sensor, Plug, Pins and Pin Lock

100 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 100 PSIg Stainless Sensor, Connector, Pins & 1/8 in NPT to -4 Adapter 100 PSIg Stainless Sensor Kit, Stainless Steel Sensor Body, 1/8-inch NPT Male Thread,...

150 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 150 PSIg Stainless Sensor, Connector, Pins & 1/8 in NPT to -4 Adapter 150 PSIg Stainless Sensor Kit, Stainless Steel Sensor Body, 1/8-inch NPT Male Thread,...

Fluid Temperature Sensor DTM-Style Kit. Includes 1/8 in NPT Temperature Sensor with High Performance DTM-Style Connector, Aluminum Bung, Connector & Pins Fluid Temperature Sensor DTM-Style Kit, Includes 1/8-inch NPT Temperature Sensor with High...

Air Temp Sensor DTM-Style Kit. Includes 1/8 in NPT Air Temperature Sensor with High Performance DTM-Style Connector, Aluminum Bung, Connector & Pins Air Temperature Sensor DTM-Style Kit, Includes 1/8-inch NPT Air Temperature Sensor with High...

Ethanol Content Flex Fuel Sensor Kit (-6 AN). -6 AN Fittings. Includes: Flex Fuel Content Sensor, -6 AN Fittings, Connector, Terminals & Wire Seals Ethanol Content Flex Fuel Sensor Kit with -6 AN Fittings, Includes Flex Fuel Content Sensor, -6 AN...

8-Channel K-Type Thermocouple EGT/Temperature Sensor Module with CANbus connectivity, includes CAN Module, DTM connector plug, Velcro tab for mounting and instructions.

Wideband UEGO Sensor with Stainless Tall Manifold Bung Install Kit - 4 Channel Wideband Bosch 4.2LSU Wideband UEGO Sensor with Stainless Tall Manifold Bung Install Kit for 4 Channel Wideband Controller PN 30-2340

Stainless steel Water/Methanol Injection Solenoid that eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. High flow capability (3,600cc/min) and an low current draw of only 0.75A

2000 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 2000 PSIg Stainless Sensor, Connector, Pins & 1/8 in NPT to -4 Adapter 2000 PSIg Stainless Sensor Kit, Stainless Steel Sensor Body, 1/8-inch NPT Male...

15 PSIa or 1 Bar Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 15 PSIa or 1 Bar Stainless Sensor, Connector, Pins, 1/8 in NPT to -4 Adapter & 1/8 in NPT to 3/16 in Barb Adapter 15 PSIa or 1 Bar Stainless Sensor...

500 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 500 PSIg Stainless Sensor, Connector, Pins & 1/8 in NPT to -4 Adapter 500 PSIg Stainless Sensor Kit, Stainless Steel Sensor Body, 1/8-inch NPT Male Thread,...

75 PSIa or 5 Bar Brass Sensor Kit. Brass Sensor Body. 1/8 in NPT Male Thread. Includes: 75 PSIa or 5 Bar Brass Sensor, Connector & Pins 75 PSIa or 5 Bar Brass Sensor Kit, Brass Sensor Body, 1/8-inch NPT Male Thread, Includes 75 PSIa or 5 Bar...

100 PSIa or 7 Bar Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8" NPT Male Thread. Includes: 75 PSIa or 5 Bar Stainless Sensor, Connector, Pins, 1/8" NPT to -4 Adapter & 1/8" NPT to 3/16" Barb Adapter

50 PSIa or 3.5 Bar Brass Sensor Kit. Brass Sensor Body. 1/8 in NPT Male Thread. Includes: 50 PSIa or 3.5 Bar Brass Sensor, Connector & Pins 50 PSIa or 3.5 Bar Brass Sensor Kit, Brass Sensor Body, 1/8-inch NPT Male Thread, Includes 50 PSIa or 3.5 Bar...

30 PSIa or 2 Bar Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 30 PSIa or 2 Bar Stainless Sensor, Connector, Pins, 1/8 in NPT to -4 Adapter & 1/8 in NPT to 3/16 in Barb Adapter 30 PSIa or 2 Bar Stainless Sensor...

AEM Single K-Type Thermocouple Kit - 4 Pack

Bosch LSU 4.2 Wideband UEGO Installation Kit. Includes: Bosch LSU 4.2 Wideband UEGO Sensor, Weld-On Bung, Connector, Wire-Seals & Pins Bosch LSU 4.2 Wideband UEGO Installation Kit, Includes: Bosch LSU 4.2 Wideband UEGO Sensor, Weld-On Bung,...

RTD Exhaust Gas Temperature Sensor Kit, 90-Degree Platinum Closed Tip Design with Inconel 601 Coating, -40?C to 850?C Temperature Range, M14x1.5 Thread w/ Bung, 2-Pin DTM Connector (Mating Connector Not Included)

1000 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 1000 PSIg Stainless Sensor, Connector, Pins & 1/8 in NPT to -4 Adapter 1000 PSIg Stainless Sensor Kit, Stainless Steel Sensor Body, 1/8-inch NPT Male...

Torque Solution 02-07 Subaru WRX/ 04-18 STI/ 04-08 FXT Map Sensor Adapter Fitment: Subaru Forester Sports 2.5 XT 2008 Subaru Forester XT 2004 Subaru Forester XT 2005 Subaru Forester XT Limited 2006 Subaru Forester XT Limited 2007 Subaru Forester XT...

Simplifies Header Installation. These BBK O2 Wire Harness Extenders are a must when installing full length headers on your 2005-2018 Dodge or Chrysler V8 due to the fact that the O2 sensor locations are relocated on full length headers. So rather than...

Torque Solution Cam Angle Sensor Bracket: Subaru WRX 2002-2005 Fitment: Subaru Impreza WRX 2002 Subaru Impreza WRX 2003 Subaru Impreza WRX 2004 Subaru Impreza WRX 2005

Since 1988 the BBK Performance brand has been synonymous with bolt on performance for modern muscle cars and trucks since its beginning in 1988. In fact it was our founders Brian & Ken Murphy that designed and developed the first aftermarket air...

Since 1988 the BBK Performance brand has been synonymous with bolt on performance for modern muscle cars and trucks since its beginning in 1988. In fact it was our founders Brian & Ken Murphy that designed and developed the first aftermarket air...

Since 1988 the BBK Performance brand has been synonymous with bolt on performance for modern muscle cars and trucks since its beginning in 1988. In fact it was our founders Brian & Ken Murphy that designed and developed the first aftermarket air...

Simplifies Header Installation. These 6 wire BBK O2 Wire Harness Extenders are a must when installing full length headers on your 2015-2018 Dodge Charger, Challenger 6.2L Hellcat due to the fact that the O2 sensor locations are relocated on full length...

NTK? is The Sensor Specialist* for import and domestic applications. Established under the NGK family of products, NTK Oxygen Sensors are part of our ongoing commitment to streamline product types and increase coverage. A ceramics company at our core,...

Skunk2 is proud to offer a 4-Bar MAP Sensor for B-, D-, H-, and F-series (SOHC and *00-*05 S2000) engines. Skunk2 MAP sensors are plug-in compatible and are direct replacements for Honda*s factory-issued MAP sensor. 4-Bar MAP Sensor; Direct...

Skunk2 is proud to offer a 4-Bar MAP Sensor for K-series engines. Skunk2 MAP sensors are plug-in compatible and are direct replacements for Honda*s factory-issued MAP sensor. 4-Bar MAP Sensor; Direct Replacement; A 1 BAR MAP sensor reports barometric...

Has your Jeep's "Check Engine" light come on? Does the scanner tell you that you need a new Crankshaft Position sensor? Omix-ADA offers high quality Crankshaft Position sensors for your specific Jeep engine. Get back on the road and enjoy the ride...

Kooks Headers and Exhaust has been the leader in the High Performance Exhaust Industry for over 50 Years! Since 1962, Kooks takes pride in offering the best headers and complete exhaust systems for your street, race and off-road applications. We have...

Omix proudly offers high quality replacement parts for your Willys/Jeep that always meet or exceed factory standards for a great fit and quality you can rely on. This replacement temperature sensor fits 97-06 Wrangler TJ, 97-01 Cherokee XJ, 97-04 Grand...

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes - no matter where or how they use their vehicle. Brake maintenance doesn*t stop at replacing brake pads and rotors. When it comes to the wear and tear on your brake...

NTK? is The Sensor Specialist* for import and domestic applications. Established under the NGK family of products, NTK Oxygen Sensors are part of our ongoing commitment to streamline product types and increase coverage. A ceramics company at our core,...

Omix proudly offers high quality replacement parts for your Willys/Jeep that always meet or exceed factory standards for a great fit and quality you can rely on. This replacement camshaft position sensor fits 99-04 Wrangler TJ 4.0 liter, 99-04 Grand...

NTK? is The Sensor Specialist* for import and domestic applications. Established under the NGK family of products, NTK Oxygen Sensors are part of our ongoing commitment to streamline product types and increase coverage. A ceramics company at our core,...

Skunk2 is proud to offer a 3-Bar MAP Sensor for K-series engines. Skunk2 MAP sensors are plug-in compatible and are direct replacements for Honda's factory-issued MAP sensor. K Series 3 BAR MAP Sensor A 1 BAR MAP sensor reports barometric pressure times...

Since 1988 the BBK Performance brand has been synonymous with bolt on performance for modern muscle cars and trucks since its beginning in 1988. In fact it was our founders Brian & Ken Murphy that designed and developed the first aftermarket air...