There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
94 thru 96 NISSAN 240SX 2.4 (ABS) (5 Lug)
Fitment:
Nissan240SXBase1991
Nissan240SXBase1992
Nissan240SXBase1993
Nissan240SXBase1995
Nissan240SXBase1996
Nissan240SXLE1991
Nissan240SXLE1992
Nissan240SXSE1989
Nissan240SXSE1990
Nissan240SXSE1991
Nissan240SXSE1992
Nissan240SXSE1993
Nissan240SXSE1994
Nissan240SXSE1995
Nissan240SXSE1996
Nissan240SXXE1989
Nissan240SXXE1990
Related Products
An relatable roduct
There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily...
$103.58
whether it be in overall balance, critical clearances or improved design, our flywheels are built for performance. Machined from the highest quality 6061 T6 or 2024 T3 aluminum, each flywheel is...
$377.99
There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily...
$154.68
Oversized Teflon lined FK Rod Ends Applications: 1989-1994 Nissan Skyline (R32) GT-R Only 1994-1998 Nissan Skyline (R33) GT-R Only Need a replacement rod end? SPL Rod Ends Installation...
$341.10
There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily...
$103.58
EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do...
$103.58
Designed for premium street driving offering better brake effect up to 600-degrees C (1100-degrees F). EBC Greenstuff has a high initial brake effect and gives drivers confidence from first...
$93.22
!